QRZ! Ham Radio 6/QRZ Ham Radio Callsign Database - Volume 6.iso/mac/files/amiga/loger303.lzh/wpx/wpx.defaults

Text File | 1993-03-25 | 2KB | 64 lines

!Specify the defaults for the program
!b - backup log output to the printer.
!P - rig's power output. Only used on the QSL card.
!p - the power output multiplier - default is 10
!s - the power source bonus - default is 1.5 (battery)
!t - timezone in the format   [-]hh[:mm][D]
!     Timezones WEST of Greenwich are POSITIVE numbers. So, the optional
!     minus sign is used to indicate EAST of Greenwich.
!     The optional minutes [:mm] allows setting the timezone to
!     After the time, an optional letter 'D' indicates daylight savings
!     time is used in this zone.
!     Thus, the time you specify with hh:mm is your local STANDARD timezone
!     used during the winter.
!     Once set this need not be changed as the program will adjust for
!     DST if necessary. BUT the user must always ensure that the AMIGA
!     clock is running on LOCAL TIME (i.e. on 1st Sunday in April and last
!     Sunday in October, you must adjust your clock.
!     Alternatively, you can set the environment variable TZ_CHU in your
!     s:startup-sequence file as follows:
!     setenv TZ_CHU [-]hh[:mm][D]
!     If the timezone is specified in this file then it overrides the
!     environment variable. If neither are specified then the program
!     prints an error message and terminates.
!f -  forces program to use specified frequency and mode, NOT the frequency
!     or mode of the the radio.
!     If this command is used the serial port is not opened.
!     This value defaults to zero and when set to zero the
!     value on the radio is used.
!     Setting this to a non-zero value allows you to enter a previously
!     recorded log (thus, the frequency on the radio is irrelevant).
!l -  Sets morse code memory. e.g.    l N string ...   sets memory N
!     to the specified string
!
!     The string may contain abbreviations for commonly used strings.
!     %C Replaced by the users callsign as given by the 'c' command (below)
!     %c Replaced by the callsign typed in the beginning of the data entry
!        line
!     %N Replaced by the current QSO number.
!m - sets morse code speed. e.g.  m 40  sets it to 40wpm.
!
!k - sets keyer type.
!    0 = Iambic Curtis B with dot/dash memory  (DEFAULT)
!    1 = Iambic Curtis A with dot/dash memory
!    2 = bug. Automatic dots. Manual dash.
!c - set your callsign.
!
c ve5va
p 10
s 1
l 1 5nn %N k
l 2 %N %N k
l 3 de %C %C k
l 4 ve5va
l 5 5nn %N de %C k
l 6 nr?
l 8 %c 5nn %N k
l 10 tu
m 25
k 0
P 0.9W
f 14020 cw
;b
a 0